Home › Winter garage door problems (and how to prevent them)
Winter garage door problems (and how to prevent them)
Chicago-area winters are hard on garage doors. Cold makes metal brittle, grease stiff and rubber seals freeze to the floor. Most winter problems are preventable with a few minutes of care in the fall.
1. Broken springs
Clopay, a major door maker, says springs tend to break most often in cold weather, when the metal is more brittle. A spring near the end of its life is the one most likely to snap on a cold morning. If you hear a bang and the door won't lift, read our spring guide and don't keep running the opener.
Prevent it: the door industry association DASMA says rust shortens spring life and recommends lubricating springs as the manufacturer's instructions say. A pro can also tell you if your springs are near the end of their life before winter.
2. Door frozen to the ground
Snowmelt runs under the door and freezes the rubber bottom seal to the floor. The opener strains, or the door lifts unevenly and can damage the seal or the opener.
Prevent it: clear snow and slush away from the door's bottom edge, and keep the floor under the seal dry. If it's already stuck: don't force it with the opener. Gently free the seal (a hair dryer or a plastic scraper works), then try again.
3. Door slow, noisy or stopping partway
Old grease thickens in the cold, so rollers, hinges and the opener's chain or screw drag. Some openers then stop or reverse because they sense extra resistance.
Prevent it: use a lubricant made for garage doors on hinges, metal rollers and springs, following the door maker's instructions. Don't put heavy grease in the tracks; wipe them clean instead.
4. Door reverses for no reason
Snow, ice, road salt spray or a shovel leaned against the wall can block or knock the safety sensors out of line. Clear and wipe them, then check that both lights are steady. More in the opener checklist.
5. Remote stops working
Batteries lose power faster in the cold. If the wall button works but the remote doesn't, try a fresh battery first.
Fall checklist
- Watch the door open and close. Does it move smoothly and evenly?
- Lubricate hinges, rollers and springs per the manufacturer's instructions.
- Check the bottom seal for cracks or gaps.
- Test the auto-reverse as described in your opener's manual.
- Replace remote and keypad batteries.
- Look for frayed cables or a gap in a spring. If you see one, stop using the door and call a pro.
Sources
- Clopay, "Do I Have a Broken Garage Door Spring?" (2021), clopaydoor.com.
- DASMA Technical Data Sheet 190, springs, dasma.com.
- 16 CFR Part 1211, Safety Standard for Automatic Residential Garage Door Operators, ecfr.gov.
Tell us what's wrong. We pass your request to one independent local contractor. Free, no obligation. We are a referral service, not a contractor.
Request help — takes 1 minuteMore guides
- Garage door spring replacement in Naperville
- Garage door opener not working? A troubleshooting checklist
- Garage door repair cost in Naperville
- Questions to ask a garage door company before you hire
Last updated November 2026. Written by Sunny Patel, who runs this referral service. We are not garage door technicians; this is general information gathered from the sources named on this page, not professional advice.